1 2

AURSINC

AURSINC Allstar RF Node UHF SR-FRS Radio Programming Module Pi-hat for Allstar, Echolink, APRS, Digital Modes Compatible for Raspberry Pi 2/3/4, Pin to Pin Replace SA-818 Module, UHF Freq 400-470

AURSINC Allstar RF Node UHF SR-FRS Radio Programming Module Pi-hat for Allstar, Echolink, APRS, Digital Modes Compatible for Raspberry Pi 2/3/4, Pin to Pin Replace SA-818 Module, UHF Freq 400-470

$68.99
$72.99 $68.99
Sale Sold out
Shipping calculated at checkout.
  • [Upgraded Allstar Node] AURSINC Allstar Node SR-FRS Radio Programming Module (pin to pin replace SA-818 Module) is a versatile Raspberry-Pi hat that can be used for Allstar, Echolink, APRS, or any digital modes
  • [Working Mode] The both sides of the a TYPE C connecters have different function; PWR+COS(Flash) Communication with Raspberry on USB (main); PWR(GREEN) use /dev/ttyUSB0 to Change UHF RF node Frequency (only work when you want change UHF Freq (400-470)
  • [Additional Help] Use the program in this GitHub repository to program the radio module SR-FRS used for the Pi-Hat (github. com/jumbo5566/SRFRS) DCS Codes not support YET. Please refer to this link for setup questions: [https:// dc9vq.de /fm-funknetz-installation-fuer-den-shari-sa818a-vhf-mit-raspi-image/]
  • [Four section on This Program] Radio-Program the radio (frequency/tome/squelch); Volume -Set the volume level; Filters-Set filters; Version-Show the firmware version of the SA818
  • [SR110U Board OLED Indicators] PTT flash red led light means RF transmit; COS in blue means receiving the RF signal; COM in YELLOW means audio data transmit; PWR means power supply is normal
  • [Package list & NOTE] A SR-FRS Radio Programming Module, USB C Cable and an Antenna. NOTE: Before programming the SR-FRS module, make sure you HAVE consulted the band plan for your country and transmit on a frequency you are allowed to use
  • [Compatibility issues] Compatible with Rpi 2, it can communicate directly with the Rpi 2 via the included Type C to USB cable. Please note that the USB connector should be properly inserted into the device
View full details